![]() Gently pull the receptacle out to expose the wires. Remove the screws on the top and bottom of the receptacle that attach it to the electrical box. Unscrewing the receptacle from the electrical box. If you’re planning on reusing the existing cover plate, put it aside. If the cover plate is stuck to the wall with paint, run a utility knife between the cover plate and wall to cut through the layer of paint. Use a screwdriver to remove the center screw holding the cover plate in place. As a precaution, test both plugs of the receptacle with a voltage tester to make sure the outlet is not conducting any current before proceeding. If you’re not sure how to turn the power off to the outlet, flip the main breaker to shut down power to the entire house. That way you will be able to either see or hear the device go off when you flip the right breaker. To determine which breaker is the right one, plug a lamp, hair dryer, fan, or radio into the outlet and turn it on. Turn off the circuit breaker that powers the electrical outlet you plan to replace. Step 1: Turn Power Off at Circuit Breaker Cover Plate: A new outlet cover plate to match the receptacle, if the old plate needs replacing.Receptacle: The proper type wall outlet for your wiring and electrical needs as determined above.Electrical Tape: Standard black electrical tape for wrapping wires.Wire Strippers: A pair of wire strippers.Voltage Tester: An inexpensive, non-contact voltage tester. ![]()
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |